clikc on image to enlarge
Hello Soldier Quintero,
All we have for now is on the blog biodigestores http://biodigestoresyeapu.blogspot.com/ if you are interested in building one, carefully research what in there, with the information it contains is enough to start make a prototype, if you know read the plans, photos, etc. ..
We recommend that if you have a friend or family member who engages in construction or as a handyman, I mentioned it, four eyes are always more than two.
If you want to make something much more sophisticated, you'll have to look for information outside of the blog in the network, or you know someone or company that has a go and see and ask if you can, with diplomacy and without accelerated.
Regarding the pressure relief valve, all the digesters are in the most basic, we will explain, this is a T-tube by passing the methane that builds up in the hood digester, towards the bottom of a bottle or plastic bottle, which is partially filled with water, depending on the pressure you want at the start, that methane gas bubbles inside the bottle out east by holes in the neck of this abroad, on the other end of the T goes out to the burners, stoves, etc..
with this explanation is defined as soft, if you close the gas cock to the kitchen for example, the excess pressure in the pipe do not eat according to the digester will generate methane, exit through the holes valve to the outside without overloading the pressure on the bell of digester.
On this I attach an explanatory map in jpg file
There are also options for storing the gas accumulated in drums in secure areas, while those filled with one part water, where the gas bubbles and accumulates in the top of the drum, thus having an extra gas is not lost by not consuming it.
hope that some idea but you have given.
0 comments:
Post a Comment